YSmarines, which is one of the most professional marine and offshore equipment, specialized in an extensive range of products, including mooring bollard, marine fairlead, marine anchor, ship seats, marine lighting, etc, provides superior quality marine rubber fenders with various types and reasonable prices. Advantages of YSmarines rubber fenders 1. With More than 10 years of experience, YSmarines is one of the most reliable rubber fender suppliers with stable quality products and a large scale of production ability. 2. The inflatable rubber fender adopts the advanced international inflatable fender production technology and YSmarines has hired rich-experienced engineers to conduct training and guidance, strictly in accordance with ISO quality standards. 3. YSmarines has advanced raw material testing equipment, producing equipment. The YSmarines rubber fenders are sold worldwide and excellent quality has been verified by customers. 4. YSmarines provides the most competitive prices for rubber fenders, with the most thorough production equipment which avoids the rated cost of outing processing. At the same time, the perfect management system and a rich production experience have greatly reduced unnecessary work hours and wasting materials.

1. Support photoelectric sensor, ultrasonic sensor, CCD sensor. 2. Intelligent detection sensor parameters, no need for calibration sensors in most situations. 3. Automatic stroke measurement, not any mechanical switch needed. 4. Adopts variable PI adjustment algorithm, high precision, fast responding, with smaller error. 5. Super high response speed of 500 microseconds. 6. Analog sensor signal adopts 16-bit AD sampling. 7. Adopts the FIR digital wave filter, with strong anti-interference ability and more stable signals. 8. DC servo motor pushing the ball screw 9.Support Simplified Chinese, Traditional Chinese, English, three languages. 10. User-friendly operation, fast and easy. 11. Support MODBUS and PLC operation. https://www.arisewebguiding.com/pages/web-guide.html

The web guide system is mainly applied to the lateral deviation control of the coil materials, which can control various reel materials on a production line. The automatic web guide system is simple to operate, easy to install and has fast response speed, strong anti-interference, high-precision web guiding. The coils are on a long and fast production line, as the speed, tensile, the nonuniform material thickness and all kinds of mechanical damage, resulting in moving and unidirectional deviation, causing the machining operation of the middle section not easy to cooperate, resulting in the loss of many materials and the difficulty of subsequent processing. The automatic web guiding system can solve these problems, which can always keep the edge postilion of the web always be neat and consistent. Web guide control can make steel, corrugated paper, textile, printing, labeling, non-woven fabric processing and other much more industries realize automated control. A typical automatic web guide system which is a closed-loop system, includes a web guiding controller, a web guide sensor, a web guide framework, and a driver. The sensor detects the difference between the detection value of the edge or the line and the set value, and converts it into a proportional signal through the PLC controller. The driver realizes the web guide. It has three guiding methods, including edge position control, line control and center control.

The marine captain's chair has a stainless steel structure, good stability. Every chair that we make is designed to be both comfortable and as ergonomically correct as possible. The structural strength and materials of the chair are all selected according to the requirements of IMO and HSC. The fabric and sponge meet the flame retardant requirements of IMO FTPC PART8. At the same time, we can provide a CCS or MED certificate for you. YSmarines is specialized in various captains, helmsman chairs with best services, professional suggestions, good quality and competitive prices. It is a light type simple design pilot chair. The material is stainless steel. The seat core using PU cold foam-forming disposable sponge; Sides of the chair using high-quality PU leather; The seat is movable back and front 120mm; Wave protection design; Characteristics Of Marine Captains Chair 1.Ergonomic design; 2. The seat can be moved back and forth; The seat is movable back and front 120mm; 3. Solid stainless steel stent; 4. Wave protection design; Materials Of TR-007 Type Captains Chair 1.Chair rack with 304 high strength thick stainless steel; sliding function used for steel structure; 2. The seat core using PU cold foam-forming disposable sponge; 3. Sides of the chair using high-quality PU leather; 4. The chair surface is made of black high-quality PU imitation leather, which can be customized into leather or cloth according to the requirements; 5. Chair shape and color can be customized according to customer requirements;

The davit launched liferaft is an inflatable type to hang life raft at ship side by launching equipment and go inboard from ship’s deck when inflating and to fall it down on the sea by davit. In case of failure in davit launching equipment, the life raft is also designed to be inflated automatically in the same way as throw-over type. It is widely used on passenger ships and cargo vessels due to its special effect. It has a capacity of 15-25 persons. It is equipped with a private free fall device and be lowered into the water by steel ropes. The installation height is 18m-35m from the water surface. YSmarines can supply customers with superb quality davit launched inflatable life raft with advanced materials. The life raft is made of rubber nylon cloth, which can be folded and stored. Have the capacity to accommodate 15,16, 20, 25 persons. It has a canopy. The floor shall be water-tight. Max. Storage height: The installation height is 18m-35m from the water surface.

1.A great effect on the smoothness of PE film When the solvent composite ripening temperature is greater than 40 ° C, it has a great effect on solvent-free composite film which has the inner layer of a PE film, and it is easy to appear the phenomenon that friction coefficient increases obviously. This is mainly because the higher the ripening temperature, the more intensely moved the molecular motion of the PE film, which is easy to migrate to the adhesive layer and the reaction is consumed, resulting in the increasing friction coefficient of the composite film. 2.Aluminum plating layer transfer Aluminum plating film, especially a polyester plating aluminum film, is prone to aluminum transfer during the solvent-free composite, thereby causing insufficient strength of the composite film peeling. 3.Dissolve with ink During the solventless composite, the phenomenon of adhesive and ink phase dissolution may occur, especially the dye-type ink. 4. Low peel strength of aluminum foil composite At present, for the solventless composite of the aluminum foil, since the peel strength is not enough, it is still necessary to satisfy the heavy-duty packaging and requirements for cooking resistance. 5. Frequent replacement of solventless adhesive types With the development of the solventless composite process, many solvent-free adhesive suppliers have introduced general solvent-free adhesives, cooking solvent-free adhesives, aluminum foil special solventless adhesive, low friction coefficient no solvent adhesive, etc. Although the diversification of the product can meet the composite requirements of different materials, the flexible packaging company also has to clean the gluing equipment and solventless machine according to the different composite materials. Not only it wastes time, human resource, financial, but also has low production efficiency. https://www.sinstarsl.com/articles/detail/an-article-to-learn-the-advantages-problems-and-development-trend-of-solventless-adhesives.html

1.Environmentally friendly Solvent-free laminating composite adopts solventless adhesive, which will not volatilize VOCs nor produce any irritating odor. It solves the problem of residual solvents in the packaging, eliminating the erosion of the organic solvent on the printing ink, can also achieve cleaning production, conducive to environmental protection. 2. Energy saving The solventless laminating machine does not need to be dried, which reduces energy consumption. Moreover, in the late-ripening process, the maturation temperature of the solvent-free composite is substantially the same as the dry composite, so the energy consumption is also relatively close. 3. Safety Since there is no organic solvent, so no need to adopt explosive and warm measures during production, transportation, storage and use and no need to specifically build a warehouse for solvent storage, more importantly, there is no harm to the health of the operator. 4.High Efficient The speed of solventless machines adopting solvent-free adhesive is generally 250 ~ 350 m / min, even up to 400 to 500 m / min, while the solvent-based adhesive composite is generally 150 ~ 180 m / min.

Cemented carbide is a composite, the main components of which consists of the powder of refractory carbide like tungsten carbide, titanium carbide through the binder metal powder such as cobalt, nickel, etc. It is a cemented composite obtained through the powder metallurgical method. It is mainly used to make high-speed cutting tools for hard, tough materials, cold working dies, measuring tools, high resistant parts with high stability and free from vibration. The hardness of the cemented carbide at normal temperature can reach HRA of 86 to 93, equivalent to HRC of 69 to 81. High hardness can be maintained at 900 to 1000 ° C with excellent wear resistance. Compared to high-speed steel, the cutting speed can be 4 to 7 times higher with 5 to 80 times longer life. The hard material of 50 HRC can be cut through carbide products. In addition to the high hardness, wear-resistance cemented carbide has a series of high performance such as good toughness, heat resistance, high corrosion resistance, high elastic modulus, etc, which can be widely used as cutting tool materials, such as turning tool, milling cutter, planner tool, drill bit, etc., suitable for cutting cast iron, non-ferrous metals, plastic, chemical fiber, graphite, glass, stone, ordinary steel, heat-resistant steel, stainless steel, high manganese steel, tool steel and other much more difficult materials. Tungsten carbide wear parts, mechanical parts and carbide wire drawing dies have advantages of high resistance of high-temperature, friction, corrosion. In various industrial applications, tungsten carbide is an ideal choice for replacing steel. Grades Of Cemented Carbide YG6, YG6X, YG8 Wear resistance, high strength, suitable for under ordinary stress conditions, manufacturing for cemented carbide ball. It can be used for forming tools, carbide nozzle, spool, valve seat, rotary burrs, seal ring, measuring tools, fixture, mechanical part accessories, etc. YG11C, YG11 Excellent wear resistance, good impact resistance, used for high voltage nozzle, lining, bushing in the industries of oil, chemical, machinery. YG15, YG15C High strength and toughness, applied for under large stress, manufacturing for seal ring, different shaped structural parts, mechanical accessories and stamping dies. Y20 YG20C The type of tungsten carbide is suitable for standard parts, bearings, tools and cold heading, cold stamping mould.